Publications - 2022

- - Rheology and soft tribology characterization of yoghurt with curcumin-loaded solid lipid nanoparticles
- - Effect of distance between grooves on the wear of structured gringing wheels
- - Effect of grooves and their geometry on the wear behavior of structured grinding wheels
- - Dynamic aspects of oral processing of curcumin-loaded solid lipid nanoparticles yoghurts by rheology and soft tribology assessment
- - Combined Engineered Cells For Multiband, Wide Band, And Miniaturized Antennas
- - Ball Milled Al Spheres for the Manufacturing of Casting-Based Al-CNT Composites
- - Hemodynamic Studies in Coronary Artery Models Manufactured by 3D Printing
- - Modelling Spherical Joints in Multibody Systems
- - On the Utilization of Simplified Methodologies for the Wheel-Rail Contact
- - Railway Dynamics with Curved Contact Patch
- - Modeling and Simulation of Frictional Contacts in Multi-rigid-Body Systems
- - Parallel, Angular and Perpendicular Parking for Self-Driving Cars using Deep Reinforcement Learning
- - Reactive Locomotion of a Hexapod for Navigation Across Irregular Ground
- - COMPUTATIONAL ANALYSIS OF OXYGEN TRANSPORT IN A LIVER-ON-A-CHIP PLATFORM
- - Influence of the Anisotropic Behavior on Equibiaxial Paths
- - Network nodes for ocean data exchange through submarine fiber optic cable repeaters
- - Submarine Cables as Precursors of Persistent Systems for Large Scale Oceans Monitoring and Autonomous Underwater Vehicles Operation
- - Documentation-driven GUI development for integration of image processing libraries
- - A low-cost, low-power and low-size multi-parameter station for real-time and online monitoring of the coastal area
- - Preliminary validation system for cuffless blood pressure measurement
- - MEMS-based fabrication of an atomic vapor cell for brain magnetic field measurement
- - MEMS rubidium vapor cell for optically pumped magnetometers
- - Detection of defects on displays based on microscopic and optical coherence tomography examination
- - Study of the influence of different geometries of an organ-on-a-chip
- - Rubidium vapor cells fabricated by additive manufacturing
- - Multi-photon microscopy setup for integration in colonoscopes: an overview
- - MEMS-based waveguide SiO2 fabricated by RIE process for optical sensing
- - Characterization of Al2O3 and SiO2 ultra-thin films deposited by ALD for microfabricated rubidium vapor cells
- - Flexible and reduced-size neural probe using a photosensitive polyimide
- - Non-contact optical analysis of the viscoelastic properties of food using brillouin spectroscopy
- - Screen-printing of thermoelectric thin films from PbSe colloidal nanocrystals
- - Deeper into hemozoin formation pathway of Plasmodium falciparum
- - Optical spectrophotometry into hemozoin: towards sensitive malaria diagnosis
- - Contribution of biomedical devices innovation to sustainable development goals (SDG)
- - Influence of boundary conditions on oxygen distribution in an organ-on-a-chip platform
- - Nanotherapeutic effect of graphene-based magnetic nanoparticles as a drug deliver nanocarrier in an advanced microfluidic biochip
- - Visualization of a blood analogue flowing in an organ-on-a-chip platfrom.
- - Influence of the inlet velocity in oxygen gradients in a liver-on-a-chip model
- - Piezoelectric and Magnetically Responsive Biodegradable Composites with Tailored Porous Morphology for Biotechnological Applications
- - Experimental Characterization of a Microfluidic Device Based on Passive Crossflow Filters for Blood Fractionation
- - About 3D Printability of Thermoplastic Collagen for Biomedical Applications
- - High Seebeck Coefficient from Screen-Printed Colloidal PbSe Nanocrystals Thin Film
- - Influence of Laser Parameters on the Texturing of 420 Stainless Steel
- - Tooth-Derived Matrix Granules for Enhanced Bone Healing: Chemical Composition, Morphological Aspects, and Clinical Outcomes
- - Flexible Neural Probe Fabrication Enhanced with a Low-Temperature Cured Polyimide and Platinum Electrodeposition
- - Enhanced Photodynamic Therapy: A Review of Combined Energy Sources
- - A Comprehensive Review on Photoacoustic-Based Devices for Biomedical Applications
- - Experimental analysis and predictive modelling of Ti6Al4V laser surface texturing for biomedical applications
- - In Silico Blood Pressure Models Comparison
- - Development of a novel hybrid Ti6Al4V–ZrO2 surface with high wear resistance by laser and hot pressing techniques for dental implants
- - A multi-camera and multimodal dataset for posture and gait analysis
- - From raw measurements to human pose – a dataset with low-cost and high-end inertial-magnetic sensor data
- - Biodegradable polymer-based microfluidic membranes for sustainable point-of-care devices
- - Thermoelectric Properties of N-Type Poly (Ether Ether Ketone)/Carbon Nanofiber Melt-Processed Composites
- - Production of a multi-functional 420 stainless steel-copper surface by laser texturing and hot pressing: a new solution for plastic injection moulds
- - A comparison of spherical joint models in the dynamic analysis of rigid mechanical systems: ideal, dry, hydrodynamic and bushing approaches
- - Carbon nanotubes based multi-directional strain sensor
- - A review on foot-ground contact modeling strategies for human motion analysis
- - Comparative toothbrush abrasion resistance and surface analysis of different dental restorative materials
- - On the Modeling of Biomechanical Systems for Human Movement Analysis: A Narrative Review
- - Genetic overlap between temporomandibular disorders and primary headaches: A systematic review
- - Development and evaluation of different electroactive poly(vinylidene fluoride) architectures for endothelial cell culture
- - Editorial for the Special Issue on Micro/Nanofluidic and Lab-on-a-Chip Devices for Biomedical Applications
- - Deep Learning-Based Energy Expenditure Estimation in Assisted and Non-Assisted Gait Using Inertial, EMG, and Heart Rate Wearable Sensors
- - Thermal Contact Resistance between Mold Steel and Additively Manufactured Insert for Designing Conformal Channels: An Experimental Study
- - A Review on Locomotion Mode Recognition and Prediction When Using Active Orthoses and Exoskeletons
- - Robotic Biofeedback for Post-Stroke Gait Rehabilitation: A Scoping Review
- - Effect of lower limb orthoses on cartilage in patients with knee osteoarthritis: A narrative review
- - Predictive models on the influence of laser texturing parameters on the Inconel 718 surface by using Nd: YVO4 laser
- - Multi-Material Additive Manufacturing for Advanced High-Tech Components
- - A Study on a Cast Steel Reinforced with WC–Metal Matrix Composite
- - A Novel Approach for Micro-Antenna Fabrication on ZrO2 Substrate Assisted by Laser Printing for Smart Implants
- - An integrative review on the tooth root canal disinfection by combining laser-assisted approaches and antimicrobial solutions
- - Towards RF graphene devices: A review
- - Modelling and numerical simulation of magnetostrictive materials for reduction of friction
- - Effect of carbon nanotubes on the biotribological behavior of hot-pressed PEEK-based composites for biomedical applications
- - Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations
- - Customized root-analogue dental implants – Procedure and errors associated with image acquisition, treatment, and manufacturing technology in an experimental study on a cadaver dog mandible
- - The influence of inorganic fillers on the light transmission through resin-matrix composites during the light-curing procedure: an integrative review
- - A bibliometric overview of Mechanism and Machine Theory journal: Publication trends from 1990 to 2020″
- - Microfluidic Processing of Piezoelectric and Magnetic Responsive Electroactive Microspheres
- - On the Reuse of SLS Polyamide 12 Powder
- - Diagnosis Methods for COVID-19: A Systematic Review
- - Analysis of a Vegetable Oil Performance in a Milling Process by MQL Lubrication
- - Active Neutralizing Mats for Corrosive Chemical Storage
- - Interceptive Treatment with Invisalign® First in Moderate and Severe Cases: A Case Series
- - Inconel 718 produced by laser powder bed fusion: an overview of the influence of processing parameters on microstructural and mechanical properties
- - Fracture characterisation of bone-cement bonded joints under mode I loading
- - 420 stainless steel-Cu parts fabricated using 3D Multi-Material Laser Powder Bed Fusion: a new solution for plastic injection moulds
- - Laser powder bed fusion of the steels used in the plastic injection mould industry: a review of the influence of processing parameters on the final properties
- - The integration of spheroids and organoids into organ-on-a-chip platforms for tumour research: A review
- - A new method for the identification of cohesive laws under pure loading modes
- - Mechanical-based therapies may reduce pain and disability in some patients with knee osteoarthritis: A systematic review with meta-analysis
- - Natural based reusable materials for microfluidic substrates: The silk road towards sustainable portable analytical systems
- - Reviewer acknowledgments and awards: Recognition awards for distinction of reviewing in 2021
- - The Influence of Laser Power and Scan Speed on the Dimensional Accuracy of Ti6Al4V Thin-Walled Parts Manufactured by Selective Laser Melting
- - Assessment of an Exhaust Thermoelectric Generator Incorporating Thermal Control Applied to a Heavy Duty Vehicle
- - Influence of Micro-Textures on Cutting Insert Heat Dissipation
- - The Challenge of Long-Distance Over-the-Air Wireless Links in the Ocean: A Survey on Water-to-Water and Water-to-Land MIoT Communication
- - Periodontal In Vitro Cells Response on Zirconia Implant Surfaces Textured with Milled Machining Micropores
- - Multi-material cellular structured orthopedic implants design: In vitro and bio-tribological performance
- - NiTi laser textured implants with improved in vivo osseointegration: An experimental study in rats
- - The double cantilever beam test applied to mode I fracture characterization of polyamide 12 processed by selective laser sintering technology
- - Antibacterial and hemostatic capacities of cellulose nanocrystalline-reinforced poly(vinyl alcohol) electrospun mats doped with Tiger 17 and pexiganan peptides for prospective wound healing applications
- - Osteosynthesis Metal Plate System for Bone Fixation Using Bicortical Screws: Numerical–Experimental Characterization
- - Electroactive functional microenvironments from bioactive polymers: A new strategy to address cancer
- - Biomimetic Implant Surfaces and Their Role in Biological Integration—A Concise Review
- - Valorizing Coffee Silverskin Based on Its Phytochemicals and Antidiabetic Potential: From Lab to a Pilot Scale
- - Methodology for Phytoplankton Taxonomic Group Identification towards the Development of a Lab-on-a-Chip
- - Mechanical Properties of Ti6Al4V Fabricated by Laser Powder Bed Fusion: A Review Focused on the Processing and Microstructural Parameters Influence on the Final Properties
- - Geometry effect in multi-step crossflow microfluidic devices for red blood cells separation and deformability assessment
- - Inertial Data-Based AI Approaches for ADL and Fall Recognition
- - Improved Tribocorrosion Behavior Obtained by In-Situ Precipitation of Ti2C in Ti-Nb Alloy
- - Textile waste-reinforced cotton-silica aerogel composites for moisture regulation and thermal/acoustic barrier
- - Modification of Zirconia Implant Surfaces by Nd:YAG Laser Grooves: Does It Change Cell Behavior?
- - Experimental evaluation of cohesive laws components of mixed-mode I + II fracture characterization of cortical bone
- - Acetic acid triggers cytochrome c release in yeast heterologously expressing human Bax
- - Recent trends of biomaterials and biosensors for organ-on-chip platforms
- - Osseointegration Assessment of Multi-Material Ti6Al4V-? TCP Implants: An Experimental Study in Rats
- - Solid Magnetoliposomes as Multi-Stimuli-Responsive Systems for Controlled Release of Doxorubicin: Assessment of Lipid Formulations
- - Metamaterial Vivaldi Antenna Array for Breast Cancer Detection
- - The Influence of Precipitation Hardening on the Damping Capacity in Al–Si–Mg Cast Components at Different Strain Amplitudes
- - Cutting temperature measurement and prediction in machining processes: comprehensive review and future perspectives
- - Development of an Ultraviolet-C Irradiation Room in a Public Portuguese Hospital for Safe Re-Utilization of Personal Protective Respirators
- - 805692 “,Human Gingival Fibroblast and Osteoblast Behavior on Groove-Milled Zirconia Implant Surfaces
- - Detection of bladder cancer with feature fusion, transfer learning and CapsNetsI
- - Printed multifunctional magnetically activated energy harvester with sensing capabilities
- - Cellular Interaction of Bone Marrow Mesenchymal Stem Cells with Polymer and Hydrogel 3D Microscaffold Templates
- - Understanding drop spreading behaviour on WC-10wt%Co cutting tools – an experimental and numerical study
- - Investigation on the chipless RFID tag with a UWB pulse using a UWB IR-based reader
- - Preliminary tribo-electrochemical and biological responses of the Ti-TiB-TiCx in-situ composites intended for load-bearing biomedical implants
- - Porous Zirconia Blocks for Bone Repair: An Integrative Review on Biological and Mechanical Outcomes
- - Simulation Study of Vertical p–n Junction Photodiodes’ Optical Performance According to CMOS Technology
- - Peri-implant cell response on groove and pore-textured zirconia surfaces
- - Properties and applications of PDMS for biomedical engineering: A review
- - Laser-assisted manufacturing of 45S5 Bioglass-coated zirconia structured surfaces targeting medical implants: adhesive, wettability, mechanical, and bioactivity evaluation
- - Numerical Modeling of the Wave Soldering Process and Experimental Validation
- - Complex Fluid Flow in Microchannels and Heat Pipes with Enhanced Surfaces for Advanced Heat Conversion and Recovery Systems
- - Joining of Zirconia to Ti6Al4V Using Ag-Cu Sputter-Coated Ti Brazing Filler”
- - Review of Microdevices for Hemozoin-Based Malaria Detection
- - Eye Movement Alterations in Post-COVID-19 Condition: A Proof-of-Concept Study
- - Organ-on-a-Chip Platforms for Drug Screening and Delivery in Tumor Cells: A Systematic Review
- - Underwater Energy Harvesting to Extend Operation Time of Submersible Sensors
- - Editorial for the Special Issue on Micro/Nano Devices for Blood Analysis, Volume II
- - Fourier Transform Infrared (FTIR) Spectroscopy to Analyse Human Blood over the Last 20 Years: A Review towards Lab-on-a-Chip Devices
- - Fall Risk Assessment Using Wearable Sensors: A Narrative Review
- - Surface modification of zirconia dental implants by laser texturing
- - Design and surface characterization of micropatterned silica coatings for zirconia dental implants
- - Recent advances on the thermal properties and applications of nanofluids: From nanomedicine to renewable energies
- - Photobiomodulation and visual stimulation against cognitive decline and Alzheimer’s disease pathology: A systematic review
- - Root canal disinfection and maintenance of the remnant tooth tissues by using grape seed and cranberry extracts
- - A Comprehensive Review on Biomechanical Modeling Applied to Device-Assisted Locomotion
- - Influence of processing method of CoCrMo dental alloy on the corrosion behavior in artificial saliva
- - Feedback-Error Learning for time-effective gait trajectory tracking in wearable exoskeletons
- - Effect of Ultrasonic Melt Treatment on Solidification Behavior of Al7SiMg
- - Effect of the IMC layer geometry on a solder joint thermomechanical behavio
- - Lab-on-a-chip technologies for minimally invasive molecular sensing of diabetic retinopathy
- - A Recursive Algorithm for the Forward Kinematic Analysis of Robotic Systems Using Euler Angles
- - Tribocorrosion Behavior of NiTi Biomedical Alloy Processed by an Additive Manufacturing Laser Beam Directed Energy Deposition Technique
- - Methodological approaches for monitoring five major food safety hazards affecting food production in the galicia–northern portugal euroregion
- - Differentiation between normal and tumor mammary glands with depth-resolved attenuation coefficient from optical coherence tomography
- - Prediction of Solder Joint Reliability with Applied Acrylic Conformal Coating
- - Magnesium stents manufacturing: Experimental application of a novel hybrid thin-walled investment casting approach
- - A compendium of contact force models inspired by Hunt and Crossley’s cornerstone work
- - Laser surface treatment on Yttria-stabilized zirconia dental implants: Influence on cell behavior
- - Biomechanical analyses of one-piece dental implants composed of titanium, zirconia, PEEK, CFR-PEEK, or GFR-PEEK: Stresses, strains, and bone remodeling prediction by the finite element method
- - Composites Based on PDMS and Graphite Flakes for Thermoelectric Sensing Applications
- - Chipless RF Identification Tags with Microstrip Patch Resonators
- - Smart Wireless-Powering-Enabling IoT in Inhomogeneous Environments: A Case Study on Biomedical Applications
- - Provoking Artificial Slips and Trips towards Perturbation-Based Balance Training: A Narrative Review
- - Preliminary validation system for cuffless blood pressure measurement
- - Wheel-rail contact models in the presence of switches and crossings
- - Maximization of Solar Power Extraction from Photovoltaic Modules Using Energy Harvesting Solutions for Smart Cities
- - Microphone Array for Speaker Localization and Identification in Shared Autonomous Vehicles
- - Wearable Virtual Reality Tool for Balance Training: The Design and Validation on Healthy
- - Wearable Lower Limb Neuroprosthesis: System Architecture and Control Tuning
- - A Machine Learning Approach for Near-Fall Detection Based on Inertial and Force Data While Using a Conventional Rollator
- - Wearable Vibrotactile Biofeedback to Improve Human-Exoskeleton Compliance During Assisted Gait Training
- - Hexapod Posture Control for Navigation Across Complex Environments
- - Micro/Nano Devices for Blood Analysis, Volume II
- - Portuguese higher education students’ adaptation to online teaching and learning in times of the COVID-19 pandemic: personal and contextual factors
- - Contact mechanics for dynamical systems: a comprehensive review
- - Influence of the Addition of Ni-Coated Carbon Nanotubes on the Mechanical Properties of Highly Porous Zirconia Cellular Structures
- - Surface modification of glass fiber-reinforced composite posts to enhance their bond strength to resin-matrix cements: an integrative review
- - From Sound Perception to Automatic Detection of Schizophrenia: An EEG-Based Deep Learning Approach
- - Multi-material fused filament fabrication: an expedited methodology to assess the affinity between different materials
- - Tribocorrosion-Resistant Ti40Nb–TiN Composites Having TiO2-Based Nanotubular Surfaces
- - Maximization of Solar Power Extraction from Photovoltaic Modules Using Energy Harvesting Solutions for Smart Cities
- - A dataflow execution engine for automatic visual inspection of production lines
University of Minho - Dept. of Industrial Electronics - CMEMS
Campus de Azurém 4800-058 Guimarães Portugal | Tel: +351 253 510380 / Fax: +351 253 510189

CMEMS is supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding UIDB/4436/2020, and UIDP/4436//2020.
© 2025 Develop by GLanDrive
CMEMS