Blog Archives

A Nature-Inspired Superhydrophilic Nano-Powder based Silicone Rubber Composite

Mechanical stimulation of human chondrocytes by ultrasound as a bioinspired strategy to regenerate knee cartilage

Bioinspired Piezoelectric Composite Material with Antibacterial Effect

Fabrication Of Micro-Scale Laser Textured Surfaces On WC-Co Green Compacts

High density HAp and β-TCP blocks for biomedical applications-fabrication strategy and resulting properties

Tribological behavior of 316l stainless steel reinforced with cucobe + diamond composites by laser sintering and hot pressing: A comparative statistical study

Dynamic Modelling and Analysis of Human Lower Limb to Replicate Walking Gait

Laser irradiation of zirconia surfaces: effects on microstructure and mechanical performance

Texturing and remelting Mg surfaces using Nd:YAG laser

Ti-NiTi Multi material Parts Fabrication By Laser Machining And Powder Metallurgy

Development of innovative zirconia surface designs by laser for an improved implant stability

Computational Modelling of Human Lower Limb for Reproduction of Walking Dynamics with Muscles: Healthy and Pathological Cases

Piston ring/cylinder liner contact: the tribological assessment

Study Of The Influence Of Pressure And Temperature Processing In The Diamond-reinforced Composite Properties

Design, modelling and control of an active weight-bearing knee exoskeleton with a series elastic actuator

Tribological behavior of feldspathic porcelain for dental restorations

A Bio-Inspired Anti-slipping Winter Shoe-sole

Streptococcus oralis biofilm formation on Nd:YAG laser-textured zirconia implant surfaces

Hard-tissue cell response to novel functionally structured piezoelectric-ceramic composites

Como optimizar la reahabilitación de dientes endodonciados

Análise microestrutural espigões de fibra vidro em relação ao canal radicular – estudo in vitro

Soft-tissue cell response to novel functionally structured piezoelectric-ceramic composites

Comportamento celular em superfícies implantares com propriedades piezoelétricas

Análise por elementos finitos dos contactos côndilo-fossa na substituição da Articulação Temporomandibular por Prótese total

How does the Alzheimer’s disease brain respond to optomechanical stimuli? A narrative review.

BaTiO3 interlocking approaches in ZrO2 matrix

Bacterial adhesion on laser and milled micro-texturized zirconia implant surfaces

Laser texturing of piston ring for tribological performance improvement

Multi-material Inconel 718 – Aluminium parts targeting aerospace applications: A suitable combination of low-weight and thermal properties

Development and production of a CNC machined 420 stainless steel reinforced with Cu by hot pressing

Effects and mechanotransduction pathways of therapeutic ultrasound on healthy and osteoarthritic chondrocytes: a systematic review of in vitro studies

A Scoping Review on the Polymerization of Resin-Matrix Cements Used in Restorative Dentistry

Multi-functional Ti6Al4V-CoCrMo implants fabricated by multi-material laser powder bed fusion technology: A disruptive material’s design and manufacturing philosophy

Stresses, friction, and wear on different materials and design for temporomandibular joint total joint replacement (TMJ TJR)

3D multi-material laser powder bed fusion: Ti6Al4V–CuNi2SiCr parts for aerospace applications

Accuracy of Invisalign® on Upper Incisors: A Systematic Review

Ultrashort pulse laser patterning of zirconia (3Y-TZP) for enhanced adhesion to resin-matrix cements used in dentistry: An integrative review

Surface modification of zirconia or lithium disilicate-reinforced glass ceramic by laser texturing to increase the adhesion of prosthetic surfaces to resin cements: an integrative review

Mechanical stimulation devices for mechanobiology studies: a market, literature, and patents review

Multi-Material Inconel 718 Parts with Highly Conductive Copper Cooling Channels for Aerospace Applications

Microscopic Inspection of the Adhesive Interface of Composite Onlays after Cementation on Low Loading: An In Vitro Study

Nd-YAG Laser Texturing of Zirconia Implant Surfaces

Design, manufacturing, and testing of a laser textured piston ring surface reinforced with a CuCoBe–diamond composite by hot-pressing

Stresses, friction, and wear of on different materials and design for temporomandibular joint total joint replacement (TMJ TJR)

Morphological aspects and distribution of granules composed of deproteinized bovine bone or human dentin into a putty mixture: an in vitro study

Unravelling the physics and mechanisms behind slips and falls on icy surfaces: A comprehensive review and nature-inspired solutions

WC–Co/316L stainless steel bonding enhancement by laser surface texturing and pressure-assisted sintering

Effect of inorganic fillers on the light transmission through traditional or flowable resin-matrix composites for restorative dentistry

Inconel 718 produced by hot pressing: optimization of temperature and pressure conditions

Bio-Piezoelectric Ceramic Composites for Electroactive Implants—Biological Performance

Inconsistency in Shoulder Arthrometers for Measuring Glenohumeral Joint Laxity: A Systematic Review

Effect of inorganic fillers on the light transmission through traditional and flowable resin-matrix composites for restorative dentistry

Laser surface treatment on Yttria-stabilized zirconia dental implants: Influence on cell behavior

Surface modification of glass fiber-reinforced composite posts to enhance their bond strength to resin-matrix cements: an integrative review

Surface modification of zirconia dental implants by laser texturing

Photobiomodulation and visual stimulation against cognitive decline and Alzheimer’s disease pathology: A systematic review

Understanding drop spreading behaviour on WC-10wt%Co cutting tools – an experimental and numerical study

Porous Zirconia Blocks for Bone Repair: An Integrative Review on Biological and Mechanical Outcomes

Peri-implant cell response on groove and pore-textured zirconia surfaces

Laser-assisted manufacturing of 45S5 Bioglass-coated zirconia structured surfaces targeting medical implants: adhesive, wettability, mechanical, and bioactivity evaluation

Complex Fluid Flow in Microchannels and Heat Pipes with Enhanced Surfaces for Advanced Heat Conversion and Recovery Systems

Modification of Zirconia Implant Surfaces by Nd:YAG Laser Grooves: Does It Change Cell Behavior?

Osseointegration Assessment of Multi-Material Ti6Al4V-? TCP Implants: An Experimental Study in Rats

805692 “,Human Gingival Fibroblast and Osteoblast Behavior on Groove-Milled Zirconia Implant Surfaces

Mechanical-based therapies may reduce pain and disability in some patients with knee osteoarthritis: A systematic review with meta-analysis

Assessment of an Exhaust Thermoelectric Generator Incorporating Thermal Control Applied to a Heavy Duty Vehicle

Periodontal In Vitro Cells Response on Zirconia Implant Surfaces Textured with Milled Machining Micropores

NiTi laser textured implants with improved in vivo osseointegration: An experimental study in rats

420 stainless steel-Cu parts fabricated using 3D Multi-Material Laser Powder Bed Fusion: a new solution for plastic injection moulds

Laser powder bed fusion of the steels used in the plastic injection mould industry: a review of the influence of processing parameters on the final properties

Effect of lower limb orthoses on cartilage in patients with knee osteoarthritis: A narrative review

Predictive models on the influence of laser texturing parameters on the Inconel 718 surface by using Nd: YVO4 laser

A Novel Approach for Micro-Antenna Fabrication on ZrO2 Substrate Assisted by Laser Printing for Smart Implants

An integrative review on the tooth root canal disinfection by combining laser-assisted approaches and antimicrobial solutions

Modelling and numerical simulation of magnetostrictive materials for reduction of friction

Effect of carbon nanotubes on the biotribological behavior of hot-pressed PEEK-based composites for biomedical applications

The influence of inorganic fillers on the light transmission through resin-matrix composites during the light-curing procedure: an integrative review

Inconel 718 produced by laser powder bed fusion: an overview of the influence of processing parameters on microstructural and mechanical properties

Development of a novel hybrid Ti6Al4V–ZrO2 surface with high wear resistance by laser and hot pressing techniques for dental implants

Production of a multi-functional 420 stainless steel-copper surface by laser texturing and hot pressing: a new solution for plastic injection moulds

Comparative toothbrush abrasion resistance and surface analysis of different dental restorative materials

Tribological Characterization of Dental Restorative Materials

Influence of Laser Parameters on the Texturing of 420 Stainless Steel

Root intracanal posts on rehabilitation of endodontic treated teeth. A narrative review

Laser printing of silver-based micro-wires in ZrO2 substrate for smart implant applications

Effect of laser surface texturing on the wettability of WC-Co cutting tools

Laser Nd:YAG patterning enhance human osteoblast behavior on zirconia implants

Micro-grooved surface laser texturing of zirconia: Surface characterization and artificial soft tissue adhesion evaluation

Influence of morphology and microstructure on the tribological behavior of arc deposited CrN coatings for the automotive industry

Computational Modelling of the Bioheat Transfer Process in Human Skin Subjected to Direct Heating and/or Cooling Sources: A Systematic Review

Laser-assisted production of HAp-coated zirconia structured surfaces for biomedical applications

Laser printing of micro-electronic communication systems for smart implants applications

Compressive properties and energy absorption of metal-polymer hybrid cellular structures

Production of a laser textured 316L stainless steel reinforced with CuCoBe + diamond composites by hot pressing: Influence of diamond particle size on the hardness and tribological behaviour

Tribological solutions for engine piston ring surfaces: an overview on the materials and manufacturing

Reinforcement of a laser-textured 316L steel with CuCoBe-diamond composites through laser sintering

A novel approach to reduce in-service temperature in WC-Co cutting tools

Aunps and Agμps-functionalized zirconia surfaces by hybrid laser technology for dental implants

Influence of ns-Nd:YAG laser surface treatment on the tensile bond strength of zirconia to resin-matrix cements

Bond strength of metallic or ceramic orthodontic brackets to enamel, acrylic, or porcelain surfaces

CMEMS