Conference Archives - Page 2 of 3 - CMEMS

Application of ultrasounds in the extraction process for food waste valorisation

Fabrication and characterization of polyimide-based ‘smooth’ titanium nitride microelectrode arrays for neural stimulation and recording

A Low-power Two-Stage Active Rectifier for Energy Harvesting Applications

Magnetic Carbon Nanostructures and Study of Their Transport in Microfluidic Devices for Hyperthermia

Multi-Material Cellular Structures Produced by Selective Laser Melting: A Suitable Transition between Niti and Ti6Al4V Alloys

Feedback-Error Learning Control for Powered Assistive Devices

NiTi alloy cellular structures by Selective Laser Melting targeting orthopedic implants – Design, fabrication and mechanical characterization

Predicting the influence of processing parameters on the thickness of Ti6Al4V thin-walled plates made by SLM

Predictive tools for the elastic modulus of Ti6Al4V structures produced by Selective Laser Melting targeting orthopedic implants

Selective Laser Melting of Ti6Al4V cellular structures targeting orthopedic implants: a combination of morphological, physical and mechanical properties

Texturing and remelting Mg surfaces using Nd:YAG laser

Ti-NiTi Multi material Parts Fabrication By Laser Machining And Powder Metallurgy

Smart and multifuntional implants for life

Tribocorrosion behavior of bio-functionalized in-situ Ti-TiB-TiC composites by anodic treatment

Ti6Al4V-Bioactive Cellular Structures: A Multi-Material Approach to Enhance Cellular Response

Tribocorrosion evaluation of TiO2 bioactive surfaces doped with Sr intended for orthopaedic applications

Understanding mechanobiology – Linking the mechanical stimulation to cellular response

Wear behavior of a ceramic composite: effect of sintering temperature

Corrosion and tribocorrosion behavior of TiN coating film on Ti-Nb alloys for biomedical implant applications

Study on the influence of the yield surface shape in the hole expansion test

Dynamic Modelling and Analysis of Human Lower Limb to Replicate Walking Gait

Heat generation when forming AHSS: Experimental and numerical analysis of tensile and draw-bead tests

Electroactive polymer-based substrates for microfluidic applications

A CMOS Current Starved VCO for Energy Harvesting applications

Improved implant-host bone interaction by stimulating physiological MSC-osteogenic differentiation

Laser irradiation of zirconia surfaces: effects on microstructure and mechanical performance

Ensemble learning approaches for retinal vessel segmentation

Optical device for in situ monitoring of suspended particulate matter and organic/inorganic distinguish

Performance evaluation of a PVDF hydrophone for deep sea applications

Influence of thermocycling and colorants in the color of a bis-acryl composite resin—in vitro study

Towards graphene based RF devices

Segmentation squeeze-and-excitation blocks in stroke lesion outcome prediction

Active microfluidic substrates based on electroactive electrospun PLLA membranes

Optimization of an Electromagnetic Generator for Underwater Energy Harvester

Assessing the influence of laser parameters on the fabrication of thin-walled Ti6Al4V tubes manufactured by selective laser melting

A four-probe salinity sensor optimized for long-term autonomous marine deployments

Bioceramic blocks with graded composition for bone defects

Corrosion and tribocorrosion behavior of anodic treated Ti-Nb and Ti-Nb-Fe alloys for biomedical implant applications

Designing osteogenic-stimulating titanium-based implants

Detection of low-magnetic fields by rubidium (87Rb) vapor cell

Literature review of functional electrical stimulation systems

Development of innovative zirconia surface designs by laser for an improved implant stability

Effect of the ultrasonic melt treatment on the deployment outcomes of a magnesium stent manufactured by microcasting: A finite element analysis

Dilated convolutions in retinal blood vessels segmentation

Three-link inverted pendulum for human balance analysis: A preliminary study

Graphene Radio-Frequency Transistors with Self-Aligned Channel and Core-Shell Nanowire Gate

Development of a simulated transtibial amputee model

Environment-Aware Locomotion Mode Transition Prediction System

Computational Modelling of Human Lower Limb for Reproduction of Walking Dynamics with Muscles: Healthy and Pathological Cases

EMG-based Motion Intention Recognition for Controlling a Powered Knee Orthosis

Influence of the applied load on the creep behaviour of tin-silver-copper solder

Passive walking biped model with dissipative contact and friction forces

Utilization of Non-Conformal Wheel Surfaces for Railway Dynamics

Home Energy Monitoring System Towards Smart Control of Energy Consumption

Approach for conformal contact detection for wheel-rail interaction

Friction properties of polyoxymethylene (POM) materials in dry and lubricated conditions

Piston ring/cylinder liner contact: the tribological assessment

Study of gait cycle using a five-link inverted pendulum model: First developments

Study Of The Influence Of Pressure And Temperature Processing In The Diamond-reinforced Composite Properties

Numerical and experimental investigations on micromixers geometries for high ratio flow rates

Workers’ Body Constitution as a Risk Factor During Manual Materials Handling

Numerical study of blood flow in stented arteries: Comparison of stent designs and viscosity models

WPT system for implantable devices using a phased array and tracking algorithm for freely moving rats

Feedback-error learning for gait rehabilitation using a powered knee orthosis: First advances

PVDF piezoelectric flow sensor for velocity measurements aiming malaria diagnostics: A preliminary approach

An overview of fall-related systems developed in canes

Haemocompatibility test of simple Magnetic Nanoparticles using the distribution of deformed RBCs

Design, modelling and control of an active weight-bearing knee exoskeleton with a series elastic actuator

Human activity recognition systems: State of art

Kinematic and kinetic study of sit-to-stand and stand-to-sit movements towards a human-like skeletal model

The role of viscoelasticity in the mechanical modelling of rubbers

Instrument-based ergonomic assessment: A perspective on the current state of art and future trends

Low intensity focused ultrasound modulation of neural circuits activity

Brain tumor modeling and resection limits using millimeter wavelengths

Design and validation of a six-antenna WPT system with tracking capabilites for biomedical devices

A preliminary strategy for fall prevention in the ASBGo smart walker

Shared wireless link co-design for implantable device with far-field wireless power transfer

Small Size and Highly Sensitive Differential MEMS Accelerometer Based on Double-Ended Tuning Fork Resonators

Sub-Micron Mems Accelerometer with Handle-Layer Patterning for Damping Enhancement Using Time Transduction

Cost-Efective Lab-on-a-Chip Device for Seawater pH Quantification by Optical Methods

Low-cost Non-etched Silicon Neural Probe

A survey of fall prevention systems implemented on smart walkers

The potential of visual cues to overcome freezing of gait in Parkinson’s disease

A Proposed Single-Phase Five-Level PFC Rectifier for Smart Grid Applications: An Experimental Evaluation

Polymer-based all-printed piezo-magnetically responsive sensors and actuators

Experimental Validation of a Bidirectional Three-Level dc-dc Converter for On-Board or Off-Board EV Battery Chargers

Home glucose meters: How accurate should they be to avoid dysglycemia in patients using carbohydrate counting?

An adaptive mealtime bolus calculator to minimize the effects of inaccurate carbohydrate counting

Carbohydrate counting: How accurate should it be to achieve glycemic control in patients on intensive insulin regimens?

Preface of the “4th Symposium on Modelling and Simulation in Computer Sciences and Engineering”

Magnetic Bioreactor – BioMag

Influence of the characteristics of the 3D FE mesh on the evolution of variables used to characterize the stress state

A passive microfluidic device for cell sorting and deformability measurements

Lab-on-chip for microplastics quantification in aquatic applications

Silicon-based neural probe with an integrated µ-LED

Magneto active three-dimensional polymer based nanocomposites for bone-tissue engineering

Mechano-electrical skeletal muscle cell stimulation for tissue regeneration

MULTITOUCH PRINTED TOUCHSCREENS BASED ON PIEZOELECTRIC POLYMERS