Blog Archives

Effect of distance between grooves on the wear of structured gringing wheels

Effect of grooves and their geometry on the wear behavior of structured grinding wheels

Development of fiber structures for high performance heat resistant curtains

Wear behavior of a ceramic composite: effect of sintering temperature

Influence of the microstructure on the creep behaviour of tin-silver-copper solder

Friction and wear of ceramic reinforced resinous composites: influence of matrix content

Solder Paste Additives For Thermal Expansion Control

Wear behavior of grinding wheels with superficial coolling channels

Wear behavior of a new composite formulation, with TEOS addition, for abrasive vitrified grinding wheels

Effect of the IMC layer geometry on a solder joint thermomechanical behavior

Experimental Analysis of Heat Transfer at the Interface between Die Casting Molds and Additively Manufactured Cooling Inserts

Texturing Methods of Abrasive Grinding Wheels: A Systematic Review

An Experimental and Numerical Study on Aluminum Alloy Tailor Heat Treated Blanks

Effect of the IMC layer geometry on a solder joint thermomechanical behavio

Numerical Modeling of the Wave Soldering Process and Experimental Validation

The Influence of Precipitation Hardening on the Damping Capacity in Al–Si–Mg Cast Components at Different Strain Amplitudes

Thermoelectric Properties of N-Type Poly (Ether Ether Ketone)/Carbon Nanofiber Melt-Processed Composites

Thermal Contact Resistance between Mold Steel and Additively Manufactured Insert for Designing Conformal Channels: An Experimental Study

Influence of operating conditions on the thermal behavior and kinetics of pine wood particles using thermogravimetric analysis

Rheology of F620 solder paste and flux

Y-TZP/porcelain graded dental restorations design for improved damping behavior – A study on damping capacity and dynamic Young’s modulus

Influence of service temperature on shear creep behaviour of a rigid low-density closed-cell PIR foam

Effect of the Soldering Atmosphere on the Wettability Between Sn4.0Ag0.5Cu (in wt.%) Lead-Free Solder Paste and Various Substrates

Effect of sintering temperature on mechanical and wear behaviour of a ceramic composite

Stiffness and Damping Properties of a Composite Beam Design

Face mask, methods for obtaining and uses thereof

Produção e Estudo do Comportamento ao Desgaste de Materiais Compósitos Estruturados

Tratamentos Térmicos por Indução Electromagnética

Study of PCB Laser Depaneling

University of Minho - Dept. of Industrial Electronics - CMEMS
Campus de Azurém 4800-058 Guimarães Portugal | Tel: +351 253 510380 / Fax: +351 253 510189

CMEMS is supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding UIDB/4436/2020, and UIDP/4436//2020.
© 2025 Develop by GLanDrive
CMEMS