Publications

Silva, M. F.; Pimenta, S.; Rodrigues, J. A.; Freitas, J. R.; Ghaderi, M.; Gonçalves, L. M.; Graaf, G.; Wolffenbuttel, R. F.; Correia, J. H.

Magnesium fluoride as low-refractive index material for near-ultraviolet filters applied to optical sensors

Vacuum 181,109673

10.1016/j.vacuum.2020.109673

Figueiredo, J.; Carvalho, S. P.; Vilas-Boas, J. P.; Gonçalves, L. M.; Moreno, J. C.; Santos, C. P.

Wearable inertial sensor system towards daily human kinematic gait analysis: Benchmarking analysis to MVN BIOMECH

Sensors (Switzerland) 20(8),2185

10.3390/s20082185

Matos, T.; Faria, C. L.; Martins, M. S.; Henriques, R.; Gomes, P. A.; Gonçalves, L. M.

Design of a multipoint cost-effective optical instrument for continuous in-situ monitoring of turbidity and sediment

Sensors (Switzerland) 20(11),3194

10.3390/s20113194

Pinheiro, C.; Figueiredo, J.; Magalhães, N.; Santos, C. P.

Wearable biofeedback improves human-robot compliance during ankle-foot exoskeleton-assisted gait training: A pre-post controlled study in healthy participants

Sensors (Switzerland) 20(20),5876, pp. 1-21

10.3390/s20205876

Macedo, A. S.; Carvalho, E. O.; Cardoso, V. F. ; Correia, D. M.; Tubio, C. R.; Fidalgo-Marijuan, A.; Botelho, G.; Lanceros‐Mendez, S.

Tailoring electroactive poly (vinylidene fluoride‐co-trifluoroethylene) microspheres by a nanoprecipitation method

Materials Letters 261,127018

10.1016/j.matlet.2019.127018

Figueiredo, J.; Carvalho, S. P.; Goncalves, D.; Moreno, J. C.; Santos, C. P.

Daily Locomotion Recognition and Prediction: A Kinematic Data-Based Machine Learning Approach

IEEE Access 8,8982003, pp. 33250-33262

10.1109/ACCESS.2020.2971552

Cerqueira, S. M.; Silva, A. F.; Santos, C. P.

Smart Vest for Real-Time Postural Biofeedback and Ergonomic Risk Assessment

IEEE Access 8,9113724, pp. 107583-107592

10.1109/ACCESS.2020.3000673

Guimarães, B.; Fernandes, C. M.; Figueiredo, D.; Carvalho, Ó.; Silva, F. S. ; Miranda, G.

Effect of laser surface texturing on the wettability of WC-Co cutting tools

International Journal of Advanced Manufacturing Technology 111(7-8), pp. 1991-1999

10.1007/s00170-020-06155-3

Fernandes, B. F.; Cruz, M. B.; Marques, J. F.; Madeira, S.; Carvalho, Ó.; Silva, F. S. ; Mata, A. D. S. P.; Caramês, J. M. M.

Laser Nd:YAG patterning enhance human osteoblast behavior on zirconia implants

Lasers in Medical Science 35(9), pp. 2039-2048

10.1007/s10103-020-03066-3

Magalhães, H.; Marques, F.; Liu, B.; Antunes, P.; Pombo, J.; Flores, P. ; Ambrósio, J.; Piotrowski, J.; Bruni, S.

Implementation of a non-Hertzian contact model for railway dynamic application

Multibody System Dynamics 48(1), pp. 41-78

10.1007/s11044-019-09688-y

Lopes, D.; Puga, H.; Teixeira, João; Lima, R.

Blood flow simulations in patient-specific geometries of the carotid artery: A systematic review

Journal of Biomechanics 111,110019

10.1016/j.jbiomech.2020.110019

Cruz, M. B.; Marques, J. F.; Fernandes, B. F.; Costa, M.; Miranda, G.; Mata, A. D. S. P.; Carames, J. M. M.; Silva, F. S.

Gingival fibroblasts behavior on bioactive zirconia and titanium dental implant surfaces produced by a functionally graded technique

Journal of Applied Oral Science 28,e20200100, pp. 1-10

10.1590/1678-7757-2020-0100

Miranda, G.; Guimarães, B.; Pereira, D.; Buciumeanu, M.; Cabral, A.; Fredel, M.; Silva, F. S. ; Henriques, B.

Mechanical and tribological performance of Ni–Co-based binders for cubic boron nitride cutting tools

Journal of Composite Materials 54(20), pp. 2753-2760

10.1177/0021998320902514

Çaha, I.; Alves, A.; Chirico, C.; Pinto, A.; Tsipas, S. A.; Gordo, E.; Toptan, F.

Corrosion and Tribocorrosion Behavior of Ti-40Nb and Ti-25Nb-5Fe Alloys Processed by Powder Metallurgy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 51(6), pp. 3256-3267

10.1007/s11661-020-05757-6

Gomes, I. V.; Puga, H.; Alves, J. L.

Influence of the Adopted Balloon Modeling Strategies in the Stent Deployment Procedure: An In-Silico Analysis

Cardiovascular Engineering and Technology 11(4), pp. 469-480

10.1007/s13239-020-00470-2

Afonso, J. A.; Duarte, H. G.; Lisboa Cardoso, L. A.; Monteiro, V.; Afonso, J. L.

Wireless communication and management system for e-bike dynamic inductive power transfer lanes

Electronics (Switzerland) 9(9),1485, pp. 1-15

10.3390/electronics9091485

Souza, J. C. M.; Apaza-Bedoya, K.; Benfatti, C. A. M.; Silva, F. S. ; Henriques, B.

A Comprehensive Review on the Corrosion Pathways of Titanium Dental Implants and Their Biological Adverse Effects

Metals 10(9),1272, pp. 1-14

10.3390/met10091272

Grilo, J.; Puga, H.; Carneiro, V. H.; Tohidi, S. D.; Barbosa, F. V.; Teixeira, J. C.

Effect of hybrid ultrasonic and mechanical stirring on the distribution of m-SiCp in A356 alloy

Metals 10(5),610

10.3390/met10050610

Lopes, D.; Puga, H.; Teixeira, J. C.; Teixeira, S. F.

Fluid–Structure Interaction study of carotid blood flow: Comparison between viscosity models

European Journal of Mechanics, B/Fluids 83, pp. 226-234

10.1016/j.euromechflu.2020.05.010

Escobar, M.; Henriques, B.; Fredel, M. C.; Silva, F. S. ; Özcan, M.; Souza, J. C. M.

Adhesion of PEEK to resin-matrix composites used in dentistry: a short review on surface modification and bond strength

Journal of Adhesion Science and Technology 34(11), pp. 1241-1252

10.1080/01694243.2019.1706797

Askari, E.; Flores, P.

Coupling multi-body dynamics and fluid dynamics to model lubricated spherical joints

Archive of Applied Mechanics 90(9), pp. 2091-2111

10.1007/s00419-020-01711-5

Lopes, V.; Puga, H.; Barbosa, J.; Teixeira, J. C.

Effect of Yttria Mould Coating on the Investment Casting of AZ91D-1 wt% CaO Magnesium Alloy

International Journal of Metalcasting 14(1), pp. 98-107

10.1007/s40962-019-00339-8

Teixeira, C.; Silva, A. F.; Rocha, L. A.

A computational fluid dynamics-based sensitivity analysis of the chemical vapor analysis process to synthesize carbon nanotubes

Journal of Thermal Science and Engineering Applications 12(1),011010-1

10.1115/1.4044424

Fernandes, V.; Ferraz, A.; Ferreira, S.; Carvalho, Ó.; Silva, F. S. ; Miller, P.; Souza, J.

Root intracanal posts on rehabilitation of endodontic treated teeth. A narrative review

Vol. 2 N.º 1 (2020): RevSALUS

10.51126/revsalus.v2i1.39

Reizabal, A.; Brito-Pereira, R.; Fernandes, M. M.; Castro, N.; Correia, V.; Ribeiro, C.; Costa, C. M.; Perez, L.; Vilas-Boas, J. P.; Lanceros‐Mendez, S.

Silk fibroin magnetoactive nanocomposite films and membranes for dynamic bone tissue engineering strategies

Materialia 12,100709

10.1016/j.mtla.2020.100709

Çaha, I.; Alves, A. C.; Rocha, L. A.; Toptan, F.

A Review on Bio-functionalization of β-Ti Alloys

Journal of Bio- and Tribo-Corrosion 6(4),135

10.1007/s40735-020-00432-0

Souza, J. C. M.; Silva, C. S.; Caramês, J. M. M.; Henriques, B.; Novaes Oliveira, A. P.; Silva, F. S. ; Gomes, J. R.

Wear behavior of dental glass-ceramics: a scoping review on the damage of opposing tooth enamel surfaces

Biotribology 21,100116

10.1016/j.biotri.2020.100116

Souza, J. C. M.; Correia, M. S. T.; Oliveira, M. N.; Silva, F. S. ; Henriques, B.; Novaes Oliveira, A. P.; Gomes, J. R.

PEEK-matrix composites containing different content of natural silica fibers or particulate lithium‑zirconium silicate glass fillers: Coefficient of friction and wear volume measurements

Biotribology 24,100147

10.1016/j.biotri.2020.100147

Carvalho, A.; Pinto, P.; Madeira, S.; Silva, F. S. ; Carvalho, Ó.; Gomes, J. R.

Tribological Characterization of Dental Restorative Materials

Biotribology 23,100140

10.1016/j.biotri.2020.100140

Leal, A.; Andrade, R.; Hinckel, B. B.; Tompkins, M.; Bastos, R.; Flores, P. ; Samuel, F.; Espregueira-Mendes, J.; Arendt, E.

Patients with different patellofemoral disorders display a distinct ligament stiffness pattern under instrumented stress testing

Journal of ISAKOS 5(2), pp. 74-79

10.1136/jisakos-2019-000409

Rodrigues, S. A.; Alves, A. C.; Silva, F. S. ; Barão, V. A. R.; Mesquita, M. F.; Rocha, L. A.; Toptan, F.

Corrosion Behavior of Titanium Frameworks under Laser and Tungsten Inert Gas Weldings: Applications in Dentistry

Surface Engineering and Applied Electrochemistry 56(3), pp. 358-364

10.3103/S106837552003014X

Marques-Almeida, T.; Correia, V.; Fernández Martín, E.; García Díez, A.; Ribeiro, C.; Lanceros‐Mendez, S.

Piezoelectric and Magnetically Responsive Biodegradable Composites with Tailored Porous Morphology for Biotechnological Applications

ACS Applied Polymer Materials

10.1021/acsapm.2c01114

Gonçalves, I. M.; Castro, I.; Barbosa, F.; Faustino, V. ; Catarino, S. O.; Moita, A. S.; Miranda, J. M.; Minas, G. ; Sousa, P. C. S.; Lima, R.

Experimental Characterization of a Microfluidic Device Based on Passive Crossflow Filters for Blood Fractionation

Processes

10.3390/pr10122698

Passos, M.; Zankovic, S.; Minas, G. ; Klüver, E.; Baltzer, M.; Schmal, H.; Seidenstuecker, M.

About 3D Printability of Thermoplastic Collagen for Biomedical Applications

Bioengenieering

10.3390/bioengineering9120780

Sousa, V.; Savelli, G.; Lebedev, O. I.; Kovnir, K.; Correia, J. H.; Vieira, E. M. F.; Alpuim, P.

High Seebeck Coefficient from Screen-Printed Colloidal PbSe Nanocrystals Thin Film

Materials

10.3390/ma15248805

Cunha, Â.; Bartolomeu, F.; Silva, F. ; Carvalho, Ó.

Influence of Laser Parameters on the Texturing of 420 Stainless Steel

Materials

10.3390/ma15248979

Souza, J. C. M.; Escobar, M.; Pimentel, I. S.; Teughels, W.; Silva, F. S. ; Henriques, B.

Tooth-Derived Matrix Granules for Enhanced Bone Healing: Chemical Composition, Morphological Aspects, and Clinical Outcomes

Ceramics

10.3390/ceramics5040070

Freitas, J. R.; Pimenta, S.; Santos, D. J.; Esteves, B. ; Gomes, N. M.; Correia, J. H.

Flexible Neural Probe Fabrication Enhanced with a Low-Temperature Cured Polyimide and Platinum Electrodeposition

Sensors

10.3390/s22249674

Rodrigues, J. A.; Correia, J. H.

Enhanced Photodynamic Therapy: A Review of Combined Energy Sources

Cells

10.3390/cells11243995

Barbosa, R. C. S.; Mendes, P. M.

A Comprehensive Review on Photoacoustic-Based Devices for Biomedical Applications

Sensors

10.3390/s22239541

Melo-Fonseca, F.; Guimarães, B.; Gasik, M.; Silva, F. S. ; Miranda, G.

Experimental analysis and predictive modelling of Ti6Al4V laser surface texturing for biomedical applications

Surfaces and Interfaces

10.1016/j.surfin.2022.102466

Gonçalves, S. A. C.; Silva, A. F.; Stieglitz, T.; Amado-Rey, A. B.

In Silico Blood Pressure Models Comparison

IEE Sensor Journal

10.1109/JSEN.2022.3215597

Madeira, S.; Buciumeanu, M.; Nobre, D.; Carvalho, Ó.; Silva, F. S.

Development of a novel hybrid Ti6Al4V–ZrO2 surface with high wear resistance by laser and hot pressing techniques for dental implants

Journal of the Mechanical Behavior of Biomedical Materials

10.1016/j.jmbbm.2022.105508

Palermo, M.; Lopes, J. M.; André, J.; Matias, A. C.; Cerqueira, J.; Santos, C. P.

A multi-camera and multimodal dataset for posture and gait analysis

Scientific Data

10.1038/s41597-022-01722-7

Palermo, M.; Cerqueira, S. M.; André, J.; Pereira, A.; Santos, C. P.

From raw measurements to human pose – a dataset with low-cost and high-end inertial-magnetic sensor data

Scientific Data

10.1038/s41597-022-01690-y

Brito-Pereira, R.; Ribeiro, C.; Lanceros‐Mendez, S.; Cardoso, V. F.

Biodegradable polymer-based microfluidic membranes for sustainable point-of-care devices

Chemical Engineering Journal

10.1016/j.cej.2022.137639

Paleo, A. J.; Krause, B.; Soares, D.; Melle-Franco, M.; Muñoz, E.; Pötschke, P.; Rocha, A. M.

Thermoelectric Properties of N-Type Poly (Ether Ether Ketone)/Carbon Nanofiber Melt-Processed Composites

Polymers

10.3390/polym14224803

Cunha, Â.; Marques, A. F. S.; Guimarães, B.; Bartolomeu, F.; Silva, F. S. ; Gasik, M.; Trindade, B.; Carvalho, Ó.

Production of a multi-functional 420 stainless steel-copper surface by laser texturing and hot pressing: a new solution for plastic injection moulds

International Journal of Advanced Manufacturing Tecnhnology

10.1007/s00170-022-10252-w

Silva, M. R.; Marques, F.; Silva, M. T.; Flores, P.

A comparison of spherical joint models in the dynamic analysis of rigid mechanical systems: ideal, dry, hydrodynamic and bushing approaches

Multibody System Dynamics

10.1007/s11044-022-09843-y