Publications

Refine search:
Clear all filters
Year
Type
Author
Scopus ID
Passos, M.; Zankovic, S.; Minas, G. ; Klüver, E.; Baltzer, M.; Schmal, H.; Seidenstuecker, M. 
About 3D Printability of Thermoplastic Collagen for Biomedical Applications
Bioengenieering

10.3390/bioengineering9120780
Sousa, V.; Savelli, G.; Lebedev, O. I.; Kovnir, K.; Correia, J. H.; Vieira, E. M. F.; Alpuim, P.
High Seebeck Coefficient from Screen-Printed Colloidal PbSe Nanocrystals Thin Film
Materials

10.3390/ma15248805
Cunha, Â.; Bartolomeu, F.; Silva, F. ; Carvalho, Ó.
Influence of Laser Parameters on the Texturing of 420 Stainless Steel
Materials

10.3390/ma15248979
Souza, J. C. M.; Escobar, M.; Pimentel, I. S.; Teughels, W.; Silva, F. S. ; Henriques, B.
Tooth-Derived Matrix Granules for Enhanced Bone Healing: Chemical Composition, Morphological Aspects, and Clinical Outcomes
Ceramics

10.3390/ceramics5040070
Freitas, J. R.; Pimenta, S.; Santos, D. J.; Esteves, B. ; Gomes, N. M.; Correia, J. H.
Flexible Neural Probe Fabrication Enhanced with a Low-Temperature Cured Polyimide and Platinum Electrodeposition
Sensors

10.3390/s22249674
Rodrigues, J. A.; Correia, J. H.
Enhanced Photodynamic Therapy: A Review of Combined Energy Sources
Cells

10.3390/cells11243995
Barbosa, R. C. S.; Mendes, P. M.
A Comprehensive Review on Photoacoustic-Based Devices for Biomedical Applications
Sensors

10.3390/s22239541
Melo-Fonseca, F.; Guimarães, B.; Gasik, M.; Silva, F. S. ; Miranda, G.
Experimental analysis and predictive modelling of Ti6Al4V laser surface texturing for biomedical applications
Surfaces and Interfaces

10.1016/j.surfin.2022.102466
Gonçalves, S. A. C.; Silva, A. F.; Stieglitz, T.; Amado-Rey, A. B.
In Silico Blood Pressure Models Comparison
IEE Sensor Journal

10.1109/JSEN.2022.3215597
Madeira, S.; Buciumeanu, M.; Nobre, D.; Carvalho, Ó.; Silva, F. S. 
Development of a novel hybrid Ti6Al4V–ZrO2 surface with high wear resistance by laser and hot pressing techniques for dental implants
Journal of the Mechanical Behavior of Biomedical Materials

10.1016/j.jmbbm.2022.105508
Palermo, M.; Lopes, J. M.; André, J.; Matias, A. C.; Cerqueira, J.; Santos, C. P.
A multi-camera and multimodal dataset for posture and gait analysis
Scientific Data

10.1038/s41597-022-01722-7
Palermo, M.; Cerqueira, S. M.; André, J.; Pereira, A.; Santos, C. P.
From raw measurements to human pose – a dataset with low-cost and high-end inertial-magnetic sensor data
Scientific Data

10.1038/s41597-022-01690-y
Brito-Pereira, R.; Ribeiro, C.; Lanceros‐Mendez, S.; Cardoso, V. F. 
Biodegradable polymer-based microfluidic membranes for sustainable point-of-care devices
Chemical Engineering Journal

10.1016/j.cej.2022.137639
Costa, S.; Pereira, M.; Ribeiro, J.; Soares, D.
Texturing Methods of Abrasive Grinding Wheels: A Systematic Review
Materials

10.3390/ma15228044
Paleo, A. J.; Krause, B.; Soares, D.; Melle-Franco, M.; Muñoz, E.; Pötschke, P.; Rocha, A. M.
Thermoelectric Properties of N-Type Poly (Ether Ether Ketone)/Carbon Nanofiber Melt-Processed Composites
Polymers

10.3390/polym14224803
Cunha, Â.; Marques, A. F. S.; Guimarães, B.; Bartolomeu, F.; Silva, F. S. ; Gasik, M.; Trindade, B.; Carvalho, Ó.
Production of a multi-functional 420 stainless steel-copper surface by laser texturing and hot pressing: a new solution for plastic injection moulds
International Journal of Advanced Manufacturing Tecnhnology

10.1007/s00170-022-10252-w
Silva, M. R.; Marques, F.; Silva, M. T.; Flores, P. 
A comparison of spherical joint models in the dynamic analysis of rigid mechanical systems: ideal, dry, hydrodynamic and bushing approaches
Multibody System Dynamics

10.1007/s11044-022-09843-y
Santos, A.; Amorim, L.; Nunes, J. P.; Silva, A. F.; Viana, J. C.
Carbon nanotubes based multi-directional strain sensor
Materials Science and Engineering B: Solid-State Materials for Advanced Technology

10.1016/j.mseb.2022.115937
Saraiva, L.; Silva, M. R.; Marques, F.; Silva, M. T.; Flores, P. 
A review on foot-ground contact modeling strategies for human motion analysis
Mechanism and Machine Theory

10.1016/j.mechmachtheory.2022.105046
Pinto, P.; Carvalho, A.; Silva, F. S. ; Gomes, J. R.; Carvalho, Ó.; Madeira, S.
Comparative toothbrush abrasion resistance and surface analysis of different dental restorative materials
Tribology International

10.1016/j.triboint.2022.107799
Roupa, I.; Silva, M. R.; Marques, F.; Gonçalves, S. B.; Flores, P. ; Silva, M. T.
On the Modeling of Biomechanical Systems for Human Movement Analysis: A Narrative Review
Archives of Computational Methods in Engineering

10.1007/s11831-022-09757-0
Cruz, D.; Monteiro, F.; Paço, M.; Vaz-Silva, M.; Lemos, C.; Alves-Ferreira, M.; Pinho, T.
Genetic overlap between temporomandibular disorders and primary headaches: A systematic review
Japanese Dental Science Review

10.1016/j.jdsr.2022.02.002
Durán-Rey, D.; Brito-Pereira, R.; Ribeiro, C.; Ribeiro, S.; Sánchez-Margallo, J. A.; Crisóstomo, V.; Irastorza, I.; Silván, U.; Lanceros‐Mendez, S.; Sánchez-Margallo, F. M.
Development and evaluation of different electroactive poly(vinylidene fluoride) architectures for endothelial cell culture
Frontiers in Bioengineering and Biotechnology

10.3389/fbioe.2022.1044667
Carvalho, V. M.; Teixeira, J. C.; Ribeiro, J. E.
Editorial for the Special Issue on Micro/Nanofluidic and Lab-on-a-Chip Devices for Biomedical Applications
Micromachines

10.3390/mi13101718
Lopes, J. M.; Figueiredo, J.; Fonseca, P.; Cerqueira, J. J.; Vilas-Boas, J. P.; Santos, C. P.
Deep Learning-Based Energy Expenditure Estimation in Assisted and Non-Assisted Gait Using Inertial, EMG, and Heart Rate Wearable Sensors
Sensors

10.3390/s22207913
Souza, A.; Capela, P. A.; Lopes, V.; Prior, F.; Puga, H.; Soares, D.; Teixeira, João
Thermal Contact Resistance between Mold Steel and Additively Manufactured Insert for Designing Conformal Channels: An Experimental Study
Journal of Manufacturing and Materials Processing

10.3390/jmmp6050099
Moreira, L.; Figueiredo, J.; Cerqueira, J.; Santos, C. P.
A Review on Locomotion Mode Recognition and Prediction When Using Active Orthoses and Exoskeletons
Sensors

10.3390/s22197109
Pinheiro, C.; Figueiredo, J.; Cerqueira, J.; Santos, C. P.
Robotic Biofeedback for Post-Stroke Gait Rehabilitation: A Scoping Review
Sensors

10.3390/s22197197
Fernandes, N.; Silva, F. S. ; Carvalho, Ó.; Leal, A.
Effect of lower limb orthoses on cartilage in patients with knee osteoarthritis: A narrative review
Prosthetics and Orthotics International

10.1097/PXR.0000000000000128
Marques, A. F. S.; Cunha, Â.; Faria, S.; Silva, F. S. ; Carvalho, Ó.
Predictive models on the influence of laser texturing parameters on the Inconel 718 surface by using Nd: YVO4 laser
Optics and Laser Technology

10.1016/j.optlastec.2022.108320
Bartolomeu, F.; Silva, F. S. 
Multi-Material Additive Manufacturing for Advanced High-Tech Components
Materials

10.3390/ma15186433
Moreira, A. B.; Ribeiro, L. M. M.; Lacerda, P.; Pinto, A. M. P.; Vieira, M. F.
A Study on a Cast Steel Reinforced with WC–Metal Matrix Composite
Materials

10.3390/ma15186199
Moura, C. G.; Dinis, H.; Carvalho, Ó.; Mendes, P. M.; Nascimento, R. M.; Silva, F. S. 
A Novel Approach for Micro-Antenna Fabrication on ZrO2 Substrate Assisted by Laser Printing for Smart Implants
Applied Sciences (Switzerland)

10.3390/app12189333
Hajjar, S.; Melo-Ferraz, A.; Carvalho, Ó.; Henriques, B.; Silva, F. S. ; Teughels, W.; Souza, J. C. M.
An integrative review on the tooth root canal disinfection by combining laser-assisted approaches and antimicrobial solutions
Lasers in Dental Science

10.1007/s41547-022-00163-0
Colmiais, I.; Silva, V.; Borme, J.; Alpuim, P.; Mendes, P. M.
Towards RF graphene devices: A review
FlatChem

10.1016/j.flatc.2022.100409
Silva, J. A.; Ferreira, R.; Sobral, L.; Silva, F. S. ; Carvalho, Ó.; Catarino, S. O.
Modelling and numerical simulation of magnetostrictive materials for reduction of friction
Engineering Research Express

10.1088/2631-8695/ac7f81
Pigosso, T.; Richhariya, V.; Binder, C.; Silva, F. S. ; Carvalho, Ó.; Gomes, J. R.
Effect of carbon nanotubes on the biotribological behavior of hot-pressed PEEK-based composites for biomedical applications
Engineering Research Express

10.1088/2631-8695/ac77db
Habraken, A. M.; Aksen, T.A.; Alves, J. L.; et al.
Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations
International Journal of Material Forming

10.1007/s12289-022-01672-w
Dantas, T. A.; Rodrigues, F.; Araújo, J.; Vaz, P.; Silva, F. S. 
Customized root-analogue dental implants – Procedure and errors associated with image acquisition, treatment, and manufacturing technology in an experimental study on a cadaver dog mandible
Journal of the Mechanical Behavior of Biomedical Materials

10.1016/j.jmbbm.2022.105350
Fidalgo-Pereira, R. C.; Carpio, D.; Torres, O.; Carvalho, Ó.; Silva, F. S. ; Henriques, B.; Özcan, M.; Souza, J. C. M.
The influence of inorganic fillers on the light transmission through resin-matrix composites during the light-curing procedure: an integrative review
Clinical Oral Investigations

10.1007/s00784-022-04589-5
Flores, P. 
A bibliometric overview of Mechanism and Machine Theory journal: Publication trends from 1990 to 2020″
Mechanism and Machine Theory

10.1016/j.mechmachtheory.2022.104965
Martins, L. A.; Ródenas-Rochina, J.; Salazar, D.; Cardoso, V. F. ; Gómez Ribelles, J. L.; Lanceros‐Mendez, S.
Microfluidic Processing of Piezoelectric and Magnetic Responsive Electroactive Microspheres
ACS Applied Polymer Materials

10.1021/acsapm.2c00380
Gomes, P. C.; Piñeiro, O. G.; Alves, A. C.; Carneiro, O. S.
On the Reuse of SLS Polyamide 12 Powder
Materials

10.3390/ma15165486
Maia, R.; Carvalho, V.; Faria, B.; Miranda, I.; Catarino, S. O.; Azevedo, R.; Lima, R.; Minas, G. ; Ribeiro, J.
Diagnosis Methods for COVID-19: A Systematic Review
Micromachines

10.3390/mi13081349
Afonso, I. S.; Pereira, J.; Ribeiro, A. E.; Amaral, J. S.; Rodrigues, N.; Gomes, J. R.; Lima, R.; Ribeiro, J.
Analysis of a Vegetable Oil Performance in a Milling Process by MQL Lubrication
Micromachines

10.3390/mi13081254
Fernandes, R. D. V.; Melro, L.; Padrão, J.; Ribeiro, A. I.; Mehravani, B.; Monteiro, F.; Pereira, E.; Martins, M. S.; Dourado, N.; Zille, A.
Active Neutralizing Mats for Corrosive Chemical Storage
Gels

10.3390/gels8080489
Pinho, T.; Rocha, D.; Ribeiro, S.; Monteiro, F.; Pascoal, S.; Azevedo, R.
Interceptive Treatment with Invisalign® First in Moderate and Severe Cases: A Case Series
Children

10.3390/children9081176
Marques, A. F. S.; Cunha, Â.; Silva, M. R.; Osendi, M. I.; Silva, F. S. ; Carvalho, Ó.; Bartolomeu, F.
Inconel 718 produced by laser powder bed fusion: an overview of the influence of processing parameters on microstructural and mechanical properties
International Journal of Advanced Manufacturing Technology

10.1007/s00170-022-09693-0
Campos, T. D.; Barbosa, M. L. S.; Olmos, A. A. R.; Martins, M. S.; Pereira, F. A. M.; Moura, M. F. S. F.; Zille, A.; Dourado, N.; Dourado, N.
Fracture characterisation of bone-cement bonded joints under mode I loading
Theoretical and Applied Fracture Mechanics

10.1016/j.tafmec.2022.103404
Cunha, Â.; Marques, A. F. S.; Silva, F. S. ; Gasik, M; Trindade, B.; Carvalho, Ó.; Bartolomeu, F.
420 stainless steel-Cu parts fabricated using 3D Multi-Material Laser Powder Bed Fusion: a new solution for plastic injection moulds
Materials Today Communications

10.1016/j.mtcomm.2022.103852
1 … 8 9 10 11 12 … 21
University of Minho - Dept. of Industrial Electronics - CMEMS
Campus de Azurém 4800-058 Guimarães Portugal | Tel: +351 253 510380 / Fax: +351 253 510189

CMEMS is supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding UID/4436/2025 (DOI: https://doi.org/10.54499/UID/04436/2025)
© 2026 Develop by GLanDrive
CMEMS