Journals

Bunea, M.; Cîrciumaru, A.; Buciumeanu, M.; Bîrsan, I. G.; Silva, F. S.

Low velocity impact response of fabric reinforced hybrid composites with stratified filled epoxy matrix

Composites Science and Technology 169, pp. 242-248

10.1016/j.compscitech.2018.11.024

Pereira, S.; Pinto, A.; Amorim, J.; Ribeiro, A.; Alves, V.; Silva, C. A.

Adaptive Feature Recombination and Recalibration for Semantic Segmentation with Fully Convolutional Networks

IEEE Transactions on Medical Imaging 38(12),8718639, pp. 2914-2925

10.1109/TMI.2019.2918096

Frazão, C.; Díaz, B.; Barros, J.; Bogas, J. A.; Toptan, F.

An experimental study on the corrosion susceptibility of Recycled Steel Fiber Reinforced Concrete

Cement and Concrete Composites 96, pp. 138-153

10.1016/j.cemconcomp.2018.11.011

Roedel, S.; Mesquita-Guimarães, J.; Souza, J. C. M.; Silva, F. S. ; Fredel, M. C.; Henriques, B.

Production and characterization of zirconia structures with a porous surface

Materials Science and Engineering C 101, pp. 264-273

10.1016/j.msec.2019.03.087

Moura, C. G.; Carvalho, Ó.; Gonçalves, L. M.; Cerqueira, M. F.; Nascimento, R. M.; Silva, F. S.

Laser surface texturing of Ti-6Al-4V by nanosecond laser: Surface characterization, Ti-oxide layer analysis and its electrical insulation performance

Materials Science and Engineering C 104,109901

10.1016/j.msec.2019.109901

Schünemann, F. H.; Galarraga-Vinueza, M. E.; Magini, R.S.; Fredel, M.; Silva, F. S. ; Souza, J. C. M.; Zhang, Y.; Henriques, B.

Zirconia surface modifications for implant dentistry

Materials Science and Engineering C 98, pp. 1294-1305

10.1016/j.msec.2019.01.062

Costa, M. M.; Lima, R.; Melo-Fonseca, F.; Bartolomeu, F.; Alves, N.; Miranda, A.; Gasik, M.; Silva, F. S. ; Silva, N. A.; Miranda, G.

Development of β-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties

Materials Science and Engineering C 98, pp. 705-716

10.1016/j.msec.2019.01.016

Pereira, F. A. M.; Dourado, N.; Moura, M. F. S. F.

Enhancement of stiffness and load bearing capacity of damaged mortar beams with CFRP patches

Composite Structures 210, pp. 518-525

10.1016/j.compstruct.2018.11.074

Carneiro, V. H.; Puga, H.; Meireles, J.

Positive, zero and negative Poisson’s ratio non-stochastic metallic cellular solids: Dependence between static and dynamic mechanical properties

Composite Structures 226,111239

10.1016/j.compstruct.2019.111239

Rodrigues, J. A.; Amorim, R.; Silva, M. F.; Baltazar, F.; Wolffenbuttel, R. F.; Correia, J. H.

Photodynamic Therapy at Low-Light Fluence Rate: In vitro Assays on Colon Cancer Cells

IEEE Journal of Selected Topics in Quantum Electronics 25(1),7202506

10.1109/JSTQE.2018.2889426

Puga, H.; Barbosa, J.; Machado, J. M.; Vilarinho, M. C.

Ultrasonic grain refinement of die cast copper alloys

Journal of Materials Processing Technology 263, pp. 336-342

10.1016/j.jmatprotec.2018.08.034

Toptan, F.; Alves, A. C.; Carvalho, Ó.; Bartolomeu, F.; Pinto, A. M. P.; Silva, F. S. ; Miranda, G.

Corrosion and tribocorrosion behaviour of Ti6Al4V produced by selective laser melting and hot pressing in comparison with the commercial alloy

Journal of Materials Processing Technology 266, pp. 239-245

10.1016/j.jmatprotec.2018.11.008

Vieira, E. M. F.; Figueira, J.; Pires, A. L.; Grilo, J.; Silva, M. F.; Pereira, A. M.; Gonçalves, L. M.

Enhanced thermoelectric properties of Sb2Te3 and Bi2Te3 films for flexible thermal sensors

Journal of Alloys and Compounds 774, pp. 1102-1116

10.1016/j.jallcom.2018.09.324

Okhay, O.; Gonçalves, G.; Dias, C.; Ventura, J.; Vieira, E. M. F.; Gonçalves, L. M.; Tkach, A.

Tuning electrical and thermoelectric properties of freestanding graphene oxide papers by carbon nanotubes and heat treatment

Journal of Alloys and Compounds 781, pp. 196-200

10.1016/j.jallcom.2018.12.033

Azarniya, A.; Colera, X. G.; Mirzaali, M. J.; Sovizi, S.; Bartolomeu, F.; Weglowski, M. K.; Wits, W. W.; Yap, C. Y.; Ahn, J.; Miranda, G.; Silva, F. S. ; Madaah, H. H. R.; Ramakrishna, S.; Zadpoor, A. A.

Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties

Journal of Alloys and Compounds 804, pp. 163-191

10.1016/j.jallcom.2019.04.255

Lopes, D.; Puga, H.; Teixeira, J. C.; Teixeira, S. F.

Influence of arterial mechanical properties on carotid blood flow: Comparison of CFD and FSI studies

International Journal of Mechanical Sciences 160, pp. 209-218

10.1016/j.ijmecsci.2019.06.029

Mesquita-Guimarães, J.; Ramos, L.; Detsch, R.; Henriques, B.; Fredel, M. C.; Silva, F. S. ; Boccaccini, A. R.

Evaluation of in vitro properties of 3D micro-macro porous zirconia scaffolds coated with 58S bioactive glass using MG-63 osteoblast-like cells

Journal of the European Ceramic Society 39(7), pp. 2545-2558

10.1016/j.jeurceramsoc.2019.01.029

Carneiro, V. H.; Pereira, J.; Lopes, V.; Jesus, C.; Puga, H.

Inverse engineering approach to determine the elastic properties of lightweight expanded clay

Construction and Building Materials 216, pp. 11-18

10.1016/j.conbuildmat.2019.04.264

Dourado, N.; Pereira, F. A. M.; Lousada, J. L.; Moura, M. F. S. F.

Experimental and numerical analyses of wood boards joining using wood-pin connectors

Construction and Building Materials 222, pp. 556-565

10.1016/j.conbuildmat.2019.06.179

Dourado, N.; Moura, M. F. S. F.

Effect of temperature on the fracture toughness of wood under mode I quasi-static loading

Construction and Building Materials 223, pp. 863-869

10.1016/j.conbuildmat.2019.07.036

Figueira, D.; Sena-Cruz, J.; Pereira, E.; Valente, I.; Barros, J.; Castro, F.; Soares, D.

Influence of service temperature on shear creep behaviour of a rigid low-density closed-cell PIR foam

Construction and Building Materials 225, pp. 1052-1063

10.1016/j.conbuildmat.2019.07.337

Dourado, N.; Moura, M. F. S. F.; Jesus, A.

Fatigue-fracture characterization of wood under mode I loading

International Journal of Fatigue 121, pp. 265-271

10.1016/j.ijfatigue.2018.12.012

Bartolomeu, F.; Costa, M. M.; Gomes, J. R.; Alves, N.; Abreu, C. S.; Silva, F. S. ; Miranda, G.

Implant surface design for improved implant stability – A study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting

Tribology International 129, pp. 272-282

10.1016/j.triboint.2018.08.012

Bartolomeu, F.; Abreu, C. S.; Moura, C. G.; Costa, M. M.; Alves, N.; Silva, F. S. ; Miranda, G.

Ti6Al4V-PEEK multi-material structures – design, fabrication and tribological characterization focused on orthopedic implants

Tribology International 131, pp. 672-678

10.1016/j.triboint.2018.11.017

Garcia, J.; Ferreira, A. R.; Silva, F. S. ; Carvalho, Ó.; Trindade, B.

Production and tribological characterization of a textured diamond-reinforced copper-beryllium alloy

Tribology International 140,105843

10.1016/j.triboint.2019.105843

Marques, F.; Magalhães, H.; Liu, B.; Pombo, J.; Flores, P. ; Ambrósio, J.; Piotrowski, J.; Bruni, S.

On the generation of enhanced lookup tables for wheel-rail contact models

Wear 434-435,202993

10.1016/j.wear.2019.202993

Miranda, G.; Faria, S.; Bartolomeu, F.; Pinto, E.; Alves, N.; Peixinho, N.; Gasik, M.; Silva, F. S.

A study on the production of thin-walled Ti6Al4V parts by selective laser melting

Journal of Manufacturing Processes 39, pp. 346-355

10.1016/j.jmapro.2018.12.036

Fabris, D.; Mesquita-Guimarães, J.; Pinto, P.; Souza, J. C. M.; Fredel, M. C.; Silva, F. S. ; Henriques, B.

Mechanical properties of zirconia periodic open cellular structures

Ceramics International 45(13), pp. 15799-15806

10.1016/j.ceramint.2019.05.010

Madeira, S.; Buciumeanu, M.; Carvalho, Ó.; Silva, F. S.

Influence of sintering pressure on the microstructure and tribological properties of low temperature fast sintered hot-pressed Y-TZP

Ceramics International 45(5), pp. 5883-5893

10.1016/j.ceramint.2018.12.055

Çaha, I.; Alves, A. C.; Affonço, L. J.; Lisboa-Filho, P. N.; Silva, J. H. D.; Rocha, L. A.; Pinto, A. M. P.; Toptan, F.

Corrosion and tribocorrosion behaviour of titanium nitride thin films grown on titanium under different deposition times

Surface and Coatings Technology 374, pp. 878-888

10.1016/j.surfcoat.2019.06.073

Mendes, J. P.; Duñach, E.; Esperança, J. M. S. S.; Medeiros, M.; Ribeiro, J. F.; Silva, M. M.; Olivero, S.

Catalytic cyclization of propargyl bromoethers via electrogenerated nickel (I) tetramethylcyclam in ionic liquids: Water effects

Journal of the Electrochemical Society 166(6), pp. G17-G24

10.1149/2.1171904jes

Vieira, E. M. F.; Silva, J. P. B.; Veltruská, K.; Matolín, V.; Pires, A. L.; Pereira, A. M.; Gomes, M. J. M.; Gonçalves, L. M.

Highly sensitive thermoelectric touch sensor based on p-type SnO x thin film

Nanotechnology 30(43),435502

10.1088/1361-6528/ab33dd

Simões, S.; Soares, A.; Tavares, C. J.; Guedes, A.

Joining of TiAl alloy using novel Ag-Cu sputtered coated Ti brazing filler

Microscopy and Microanalysis 25(1), pp. 192-195

10.1017/S1431927618015295

Brum, R. S.; Monich, P. R.; Berti, F.; Fredel, M. C.; Porto, L. M.; Benfatti, C. A. M.; Souza, J. C. M.

On the sulphonated PEEK for implant dentistry: Biological and physicochemical assessment

Materials Chemistry and Physics 223, pp. 542-547

10.1016/j.matchemphys.2018.11.027

Guimarães, B.; Figueiredo, D.; Fernandes, C. M.; Silva, F. S. ; Miranda, G.; Carvalho, Ó.

Laser machining of WC-Co green compacts for cutting tools manufacturing

International Journal of Refractory Metals and Hard Materials 81, pp. 316-324

10.1016/j.ijrmhm.2019.03.018

Bartolomeu, F.; Buciumeanu, M.; Costa, M. M.; Alves, N.; Gasik, M.; Silva, F. S. ; Miranda, G.

Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: A tribocorrosion study targeting orthopedic applications

Journal of the Mechanical Behavior of Biomedical Materials 89, pp. 54-64

10.1016/j.jmbbm.2018.09.009

Madeira, S.; Gasik, M.; Souza, J. C. M.; Silva, F. S. ; Henriques, B.

Damping and mechanical behavior of metal-ceramic composites applied to novel dental restorative systems

Journal of the Mechanical Behavior of Biomedical Materials 90, pp. 239-247

10.1016/j.jmbbm.2018.09.046

Faria, D.; Pires, J. M.; Boccaccini, A. R.; Carvalho, Ó.; Silva, F. S. ; Mesquita-Guimarães, J.

Development of novel zirconia implant’s materials gradated design with improved bioactive surface

Journal of the Mechanical Behavior of Biomedical Materials 94, pp. 110-125

10.1016/j.jmbbm.2019.02.022

Costa, M. M.; Bartolomeu, F.; Alves, N.; Silva, F. S. ; Miranda, G.

Tribological behavior of bioactive multi-material structures targeting orthopedic applications

Journal of the Mechanical Behavior of Biomedical Materials 94, pp. 193-200

10.1016/j.jmbbm.2019.02.028

Costa, B. C.; Alves, A. C.; Toptan, F.; Pinto, A. M.; Grenho, L.; Fernandes, M. H.; Petrovykh, D. Y.; Rocha, L. A.; Lisboa-Filho, P. N.

Exposure effects of endotoxin-free titanium-based wear particles to human osteoblasts

Journal of the Mechanical Behavior of Biomedical Materials 95, pp. 143-152

10.1016/j.jmbbm.2019.04.003

Rao, S.; Hashemi, A. S.; Villanueva, J.; Silva, F. S. ; Takoudis, C.; Bijukumar, D.; Souza, J. C. M.; Mathew, M. T.

Physicochemical and in-vitro biological analysis of bio-functionalized titanium samples in a protein-rich medium

Journal of the Mechanical Behavior of Biomedical Materials 96, pp. 152-164

10.1016/j.jmbbm.2019.03.019

Madeira, S.; Mesquita-Guimarães, J.; Ribeiro, P.; Fredel, M.; Souza, J. C. M.; Soares, D.; Silva, F. S. ; Henriques, B.

Y-TZP/porcelain graded dental restorations design for improved damping behavior – A study on damping capacity and dynamic Young’s modulus

Journal of the Mechanical Behavior of Biomedical Materials 96, pp. 219-226

10.1016/j.jmbbm.2019.04.033

Marques, A. F. S.; Miranda, G.; Faria, D.; Pinto, P.; Silva, F. S. ; Carvalho, Ó.

Novel design of low modulus high strength zirconia scaffolds for biomedical applications

Journal of the Mechanical Behavior of Biomedical Materials 97, pp. 375-384

10.1016/j.jmbbm.2019.05.005

Tiainen, L.; Abreu, P.; Buciumeanu, M.; Silva, F. S. ; Gasik, M.; Serna, G. R.; Carvalho, Ó.

Novel laser surface texturing for improved primary stability of titanium implants

Journal of the Mechanical Behavior of Biomedical Materials 98, pp. 26-39

10.1016/j.jmbbm.2019.04.052

Bartolomeu, F.; Fonseca, J.; Peixinho, N.; Alves, N.; Gasik, M.; Silva, F. S. ; Miranda, G.

Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants

Journal of the Mechanical Behavior of Biomedical Materials 99, pp. 104-117

10.1016/j.jmbbm.2019.07.023

Vieira, Pedro M.; Silva, C. P.; Costa, Dalila; Vaz, I. F.; Rolanda, C.; Lima, C. S.

Automatic Segmentation and Detection of Small Bowel Angioectasias in WCE Images

Annals of Biomedical Engineering

10.1007/s10439-019-02248-7

Flores, P.

The journal of Mechanism and Machine Theory: Celebrating 55 years since its foundation

Mechanism and Machine Theory 142,103599

10.1016/j.mechmachtheory.2019.103599

Martins, M. S.; Faria, C. L.; Matos, T.; Gonçalves, L. M.; Cabral, J. M.; Silva, António; Jesus, S. M.

Wideband and wide beam polyvinylidene difluoride (PVDF) acoustic transducer for broadband underwater communications

Sensors (Switzerland) 19(18),3991

10.3390/s19183991

Matos, T.; Faria, C. L.; Martins, M. S.; Henriques, R.; Gomes, P. A.; Gonçalves, L. M.

Development of a cost-effective optical sensor for continuous monitoring of turbidity and suspended particulate matter in marine environment

Sensors (Switzerland) 19(20),4439

10.3390/s19204439